Parkingcameras.com

About the small black bracket reverse parking camera

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, with a high resolution.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

The camera has the 4 pin plug on its fly lead.  Please note that the camera has a non waterproof power regulator approx 60cm back from the camera.  This must be in a dry, protected environment to avoid premature failure eg inside a tailgate.

The camera is waterproof up to IP68.

There is a trigger loop which can turn guidelines on/off.

Camera works on 12V but if you buy with a 12V/24V monitor, the monitor reduces the voltage down to 12V.  This is the norm, and most 24V systems actually only supply 12V to the camera.

Technical Specs

Image device:- PC4089 CMOS sensor

Resolution: 700 TVL

Selectable guidelines

NTSC format

IP rating: Ip68

Camera angle: 170 degrees diagonal

HD all glass composite lens

10G vibration rating