Brake Light Reversing Camera Kits

This is a reversing camera kit for Iveco Daily vans built between 2014 and 2022 with a 5" dash monitor display. The reverse camera is designed to fit the high-level brake light for a tidy factory fit appearance. It has an ultra-wide angle for maximum safety while parking. High-quality image sensor, display, and cabling. Comes with a two-year guarantee from the trusted REVCAMUK team.

• This brake light reversing camera supplied in this kit is the most popular type of reverse camera for Fiat Ducato, Peugeot Boxer, Citroen Relay vans built between 2006-present, and more recently 2022+ new model Movano vans.
• Simply remove the existing brake light and insert the new brake light supplied in this kit with the built in reverse camera.  The existing brake light wire will need connecting up to the new wire provided.
• The 7" display used in this kit is one of the best we have ever seen, it comes from a very reliable and good quality factory - not to be confused with other similar cheap and cheerful monitors sold elsewhere.
• Either use the static guidelines that the brake light reversing camera generates, or turn these off, and use the programmable guideline function of this top of the range monitor (requires connection to reverse light).
• The monitor has a green reverse trigger wire, if you attach this to a reverse light feed, then the monitor/camera will trigger ON/OFF with reverse gear.  
• The monitor provides power to the camera, so just one power feed is required to produce a picture.  This also means that you can turn the camera on at any time you wish, including full time.  Please note that the camera will be angled down (optimised for parking), so would not see all the way down the road.
• Avoids CANBUS issues as the monitor powers the camera from the power supply at the front.
• There are half a dozen brake light camera manufacturers.  We use the one that in our experience has the best image sensor, lens quality, and reliability.  They may not be the cheapest option, but quality and reliability is important to both us and our regular customers.
• 2 Year Guarantee with us, in the unlikely event anything should go wrong.

• This brake light reversing camera supplied in this kit is the most popular type of reverse camera for Fiat Ducato, Peugeot Boxer, Citroen Relay vans built between 2006-present, and more recently 2022+ new model Movano vans.
• Simply remove the existing brake light by pressing down the 3 tabs (top and bottom) with a small flat head screw driver to release the light strip.  Then insert in to the new brake light housing supplied in this kit with the built in reverse camera.
• The 7" display used in this kit is one of the best we have ever seen, it comes from a very reliable and good quality factory - not to be confused with other similar cheap and cheerful monitors sold elsewhere.
• Either use the static guidelines that the brake light reversing camera generates, or turn these off, and use the programmable guideline function of this top of the range monitor (requires connection to reverse light).
• The monitor has a green reverse trigger wire, if you attach this to a reverse light feed, then the monitor/camera will trigger ON/OFF with reverse gear.  
• The monitor provides power to the camera, so just one power feed is required to produce a picture.  This also means that you can turn the camera on at any time you wish, including full time.  Please note that the camera will be angled down (optimised for parking), so would not see all the way down the road.
• Avoids CANBUS issues as the monitor powers the camera from the power supply at the front.
• There are half a dozen brake light camera manufacturers.  We use the one that in our experience has the best image sensor, lens quality, and reliability.  They may not be the cheapest option, but quality and reliability is important to both us and our regular customers.
• 2 Year Guarantee with us, in the unlikely event anything should go wrong.

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL 960H image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

• Upgraded 4089 High-Resolution Image Sensor - We don't settle the base level image sensor on our brake light cameras. We have opted for the 4089 700tvl image sensor, which is respected for its good colour replication, high resolution, and low light-level sensitivity.
• Premium 7" High-Resolution Digital LCD Panel Display - We have the high resolution digital LCD panels installed on this monitor. They provide great replication of colour and a sharp image.
• Night Vision IR LED's - A ring of separated Infra Red LED's provide the reverse camera with the ability to see hazards behind your van at night time. Don't worry about the light blinding other road users - it is visible to the camera but invisible to the human eye.
• 160° Extra Wide Viewing Angle Lens - We opt for the more expensive all-glass-composite lenses to be installed to our brake light cameras. This gives a very clear, undistorted view from the camera. It also prolongs the clear image compared to the cheaper plastic/glass composite lenses often seen elsewhere, where the plastic degrades and fades over time due to UV damage.
• Two-Year Guarantee - We consider the brake light manufacturer producing our cameras the best we have seen in our long experience. They stand by their product by fully supporting our 24-month guarantee period for brake light cameras. The monitor is also super reliable and will carry on working for many years to come. The monitor is also covered by the same two year guarantee period. Our extension cables, being pure copper, are highly unlikely to degrade, but for your reassurance, they are protected, too. In the unlikely event of a fault with any part of this kit during this period, we will provide a replacement.
• Great Factory-Look Appearance - This brake light reversing camera retains the factory look of your Trafic/Vivaro van. The camera is made to be an exact fit replacement for your existing high-level brake light.
• Increased Safety - Most importantly, this product will increase the safety of your van due to the increased visibility to the rear of your van. In the UK almost a quarter of all vehicle accidents occur whilst reversing. Decrease the risk of collision and injury by fitting this great quality brake light reverse camera.
• Optional Guidelines - The camera will show static coloured guidelines as standard. You can remove this and have no guidelines shown using the trigger loop next to the 4 pin connector.
• Various Monitor Bracket Options - See our guide below for the various mounting bracket options for the monitor. As standard, a "butterfly" bracket is included; alternative types can be ordered via the drop-down menu above.

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL 960H image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 10 Metres (30ft)  (or select other length in listing).

• High Resolution 7" Display - Top quality 7 inch display. Comes with a butterfly style dash mount bracket. Additional monitor brackets and mounts available using the drop down menu. See further down description for details.
• Factory Fit Appearance - Exact Fit Replacement Brake Light Camera for 2010+ Renault Master, 2010+ Nissan NV400, and 2010-2022 Vauxhall Movano Vans
• 2 Year Guarantee - The quality of the system is second to none. We provide a 24 month guarantee period for all the parts that make up this reversing camera kit. Even beyond this time, we are able to provide spares and attempt low cost monitor repairs should something fail in the distant future.
• Upgraded Image Sensor - The image sensor is one of the most important aspects in achieving good picture quality on a reversing camera. We don't accept the base spec when it comes to our cameras. We opt for improved components that we know work well. This reverse camera is fitted with the 4089 premium 700tvl image sensor. We have used it for many years; it provides great colours, a high resolution, as well as being reliable.
• All Glass Composite Lens - Often overlooked is the quality of the lens fitted to the camera. This camera is fitted with an all-glass composite lens, giving an excellent image for many years. We steer clear of the cheaper standard plastic+glass lenses, which fade over time due to UV damaging the plastic layers. There is no problem with this camera and the all-glass construction lens.
• Night Vision IR LED's - When night time comes you will still benefit from this camera due to the ring of fitted IR LED's. The combination of the IR LED's and the sensitive modern 4089 image sensor means that you will still see any obstacles even at night. Don't worry about these shining at anyone following you; the light is visible to the camera but invisible to the human eye.
• Guidelines ON/OFF - As standard the brake light camera will come with static guidelines being added. There will be a trigger loop that allows you to remove these should you not wish to use them. The Monitor also allows you to use its guidelines (if connecting the green reverse trigger wire to reverse gear). The monitor guidelines have the added bonus of allowing you to adjust where they sit on the screen to make them more useful.
• Easy to fit - Simply remove your old brake light housing (one bolt at the rear), then pop the brake light housing from the kit in its place, move the bulb from the old housing to the new housing, and that's the camera installed.

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the dash monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 10 Metres (30ft)  (or select other length in listing).

This system uses the dash monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the 7 inch dash mount monitor, which has a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the dash monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234). Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the dash monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234). Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the dash monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

• This brake light reversing camera supplied in this kit is the most popular type of reverse camera for Berlingo/Partner/Combo/ProAce City vans.
• Simply remove the existing brake light and replace with the one supplied in this kit with a built in camera.
• The 7" display used in this kit is one of the best we have ever seen, it comes from a very reliable and good quality factory - not to be confused with other similar cheap and cheerful monitors sold elsewhere.
• Either use the static guidelines that the brake light reversing camera generates, or turn these off, and use the programmable guideline function of this top of the range monitor (requires connection to reverse light).
• The monitor has a green reverse trigger wire, if you attach this to a reverse light feed, then the monitor/camera will trigger ON/OFF with reverse gear.  
• The monitor provides power to the camera, so just one power feed is required to produce a picture.  This also means that you can turn the camera on at any time you wish, including full time.  Please note that the camera will be angled down (optimised for parking), so would not see all the way down the road.
• Avoid CANBUS issues with this system - as the monitor powers the camera from the power supply at the front.
• There are half a dozen brake light camera manufacturers.  We use the one that in our experience has the best image sensor, lens quality, and reliability.  They may not be the cheapest option, but quality and reliability is important to both us and our regular customers.
• 2 Year Guarantee with us, in the unlikely event anything should go wrong.

This system uses the Dash monitor which has the most modern version of 5 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well.   We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 10 Metres (30ft)  (or select other length in listing).

This system uses the Dash monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well.   We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 10 Metres (30ft)  (or select other length in listing).

• Tidy Factory Look - The brake light reversing camera is designed to be an exact fit to the location of the existing high-level brake light, retaining a tidy factory-fitted appearance on your van. This camera retains your rear wash wipe waterjet with the correct size cut-out in the lens.
• Easy Installation - This camera uses the original mounting points making it easy to secure to vehicle.
• IP69K Waterproof - This camera is rated to IP69K, the highest rating you can get. This camera will easily cope with the strongest torrential downpours you may experience with the great British summer weather.
• Superb Image Quality - This camera is fitted with an upgraded 4089 image sensor, which gives great colour replication and also returns a high resolution—700tvl. The camera also boasts an all-glass lens, which lasts a lot longer than the cheaper plastic-glass lens available from elsewhere (ours avoids the UV fade issues).
• Ultra Wide Angle - Our brake light reversing camera boasts a 170-degree (diagonally measured) ultra-wide viewing angle. The extra wide angle gives you the wide angle required to avoid obstacles around the rear of your vehicle.
• Excellent Build Quality - We picked the best brake light camera manufacturer we have come across to build these cameras to our spec. They may cost us more to bring in, but the picture quality, customer satisfaction, and reliability is worth it.
• 2-Year Guarantee - The factory we use is happy to support the two-year guarantee we offer for the brake light cameras. Feel reassured that your purchase is protected by us - Reversing Cameras UK Ltd, aka REVCAMUK. If any non-user damage fault shows itself in the two-year post-sale period, we will swap the camera to ensure your vehicles reversing safety.
• Optional Guidelines - Choose to either have guidelines added to the image or removed - your choice.
• Choice of Monitor Mounting Options - Choose from our selection of monitor mounting brackets to get the best fitment for your new display.