Single Bracket Reversing Cameras

Our Black Painted Stainless Steel Bracket Reversing Camera is fitted with a Sony 1/3" CCD 700tvl image sensor for a great, colourful, high-resolution image. Fitted with 18 IR LEDs and with the Sony 811's great low-light level sensitivity, this camera has excellent night vision. Thanks to the painted stainless steel bracket, an excellent rust-resistant material, there are no worries regarding rusty brackets. 4 Pin waterproof screw locking connector cable, with the option to add one of our RCA adaptor bundle sets should you have an RCA Monitor or are fitting to a Stereo head unit.

• Great Image Quality thanks to the Sony 1/3" CCD Image Sensor Fitted - The Sony 811 1/3" CCD image sensor has long been our favourite image sensor for reversing cameras. The image sensor is the part of the camera responsible for producing an image, so as you can imagine, it plays a massive part in the image quality you see.
• Flexible Mounting Bracket - Bracket cameras remain one of the most popular types for mounting on vehicles as a reversing camera. They are easy to fit and can be mounted in a position of your choice. Most commonly, these are mounted higher up, sometimes on a rear vertical wall, e.g. on the back of a Motorhome or Van, and sometimes on a horizontal surface, e.g. on the top of a door/roof.
• Rust Resistant Painted Stainless Steel Bracket - There's nothing worse than having a rusty, mild steel reversing camera leaving orange streaks down the back of your vehicle. We have seen other supplier's cameras with such rusty brackets that the camera is no longer supported. No such worry with this camera. This camera uses a rust-resistant stainless steel bracket painted with attractive silver paint. Time tested and proven to look great many, many years later.
• IR Night Vision LED's - Thanks to the 18 IR LEDs and the great low light sensitivity of the installed Sony 811 1/3" CCD sensor, you can expect great night vision. Really important to illuminate the area behind the vehicle for the camera to help you see hazards/obstacles. Don't worry about the light affecting following drivers as it is invisible to the human eye - the camera sees and uses it.
• IP68 Waterproof Protection - This camera is built to thrive in bad weather. The IP rating gives an "ingress protection" rating against dust and water. IP68 is very high and means that it can survive in the worst storms the Great British weather can throw at it.
• Mirror Image for Rear View / Reversing - The reversing camera will send a mirror image to the monitor. This is essential for cameras pointing backwards, to ensure that the obstacles on your left are displayed to the left of the display - like a mirror does.
• Built-in Microphone - Sometimes we have customers who have a requirement for a microphone to be fitted, usually so they can hear directions from people to the rear of the vehicle.
• 120°Wide Viewing Angle - The camera has a nice wide viewing angle to help give maximum coverage and help to avoid obstacles behind the vehicle.
• Added Reversing Safety - Most importantly, with almost a quarter of all vehicle accidents in the UK occurring when reversing, having a good quality reversing camera providing a nice, clear image for the driver to view whilst reversing will reduce the likelihood of vehicle damage or harm to others.
• 4 Pin Waterproof Screw Connector - We have been a fan of the 4 pin aviation screw connector since the early 2000's. We quickly decided to build up all of our range of reversing camera kits with this type of connector. Some of our competitors chose to use inferior proprietary connectors in an attempt to lock people in to buying overpriced replacements from them. We chose a universally wired-up connector and chose the business model of selling high-quality, high-specification products for the lowest price possible.

• Great Image Quality thanks to the Sony 1/3" CCD Image Sensor Fitted - The Sony 811 1/3" CCD image sensor has long been our favourite image sensor for reversing cameras. The image sensor is the part of the camera responsible for producing an image, so as you can imagine, it plays a massive part in the image quality you see.
• Flexible Mounting Bracket - Bracket cameras remain one of the most popular types for mounting on vehicles as a reversing camera. They are easy to fit and can be mounted in a position of your choice. Most commonly, these are mounted higher up, sometimes on a rear vertical wall, e.g. on the back of a Motorhome or Van, and sometimes on a horizontal surface, e.g. on the top of a door/roof.
• IR Night Vision LED's - Thanks to the 18 IR LEDs and the great low light sensitivity of the installed Sony 811 1/3" CCD sensor, you can expect great night vision. Really important to illuminate the area behind the vehicle for the camera to help you see hazards/obstacles. Don't worry about the light affecting following drivers as it is invisible to the human eye - the camera sees and uses it.
• IP68 Waterproof Protection - This camera is built to thrive in bad weather. The IP rating gives an "ingress protection" rating against dust and water. IP68 is very high and means that it can survive in the worst storms the Great British weather can throw at it.
• Mirror Image for Rear View / Reversing - The reversing camera will send a mirror image to the monitor. This is essential for cameras pointing backwards, to ensure that the obstacles on your left are displayed to the left of the display - like a mirror does.
• Rust Resistant Painted Stainless Steel Bracket - There's nothing worse than having a rusty, mild steel reversing camera leaving orange streaks down the back of your pride and joy Motorhome. We have seen other supplier's cameras with such rusty brackets that the camera is no longer supported. No such worry with this camera. This camera uses a rust-resistant stainless steel bracket painted with matt black paint. Time tested and proven to look great many, many years later.
• 120°Wide Viewing Angle - The camera has a nice wide viewing angle to help give maximum coverage and help to avoid obstacles behind the vehicle.
• Added Reversing Safety - Most importantly, with almost a quarter of all vehicle accidents in the UK occurring when reversing, having a good quality reversing camera providing a nice, clear image for the driver to view whilst reversing will reduce the likelihood of vehicle damage or harm to others.
• 4 Pin Waterproof Screw Connector - We have been a fan of the 4 pin aviation screw connector since the early 2000's. We quickly decided to build up all of our range of reversing camera kits with this type of connector. Some of our competitors chose to use inferior proprietary connectors in an attempt to lock people in to buying overpriced replacements from them. We chose a universally wired-up connector and chose the business model of selling high-quality, high-specification products for the lowest price possible.

This is the compact version of our CCD bracket camera.

This is the compact version of our CCD bracket camera.

This is a rear view camera with a more narrow field of view to see following traffic easily.
 

This is one of our biggest selling reversing camera and is supplied as standard with a number of our 12/24V reversing camera kits. The 4 pin connector enables a nice waterproof connection between the 4 pin lead and the camera. The 4 pin leads carry both power and video down the one cable.
 

We have stocked a twin lens camera for more than a decade that uses two cameras with a compact 50mm width case. Because we frequently get asked by customers if they can use just the one in a small bracket, and because we like to listen and learn from customers, we decided to get a bracket specially produced to house our large selection of twin lens camera units. The unit fitted to the camera provided in this listing is the 45° narrow angle driving / rear view camera. The camera body is painted black, whilst the bracket is polished stainless steel. The image sensor fitted is Sony's 811, which is our favourite sensor - 1/3" CCD 700tvl.

We have stocked a twin lens camera for more than a decade that uses two cameras with a compact 50mm width case. Because we frequently get asked by customers if they can use just the one in a small bracket, and because we like to listen and learn from customers, we decided to get a bracket specially produced to house our large selection of twin lens camera units. The unit fitted to the camera provided in this listing is the 120° wide angle parking/reversing camera. The camera body is painted black, whilst the bracket is polished stainless steel. The image sensor fitted is Sony's 811, which is our favourite sensor - 1/3" CCD 700tvl.

We have stocked a twin lens camera for more than a decade that uses two cameras with a compact 50mm width case. Because we frequently get asked by customers if they can use just the one in a small bracket, and because we like to listen and learn from customers, we decided to get a bracket specially produced to house our large selection of twin lens camera units. The unit fitted to the camera provided in this listing is the 45° narrow angle driving / rear view camera. The camera body is painted white, whilst the bracket is polished stainless steel. The image sensor fitted is Sony's 811, which is our favourite sensor - 1/3" CCD 700tvl.

We have stocked a twin lens camera for more than a decade that uses two cameras with a compact 50mm width case. Because we frequently get asked by customers if they can use just the one in a small bracket, and because we like to listen and learn from customers, we decided to get a bracket specially produced to house our large selection of twin lens camera units. The unit fitted to the camera provided in this listing is the 120° wide angle parking/reversing camera. The camera body is painted white, whilst the bracket is polished stainless steel. The image sensor fitted is Sony's 811, which is our favourite sensor - 1/3" CCD 700tvl.

We get asked by some people for a camera they can make normal view instead of mirror (perhaps as an internal camera or a camera looking forwards or to the side).  Although we wouldn't recommend it low down looking forwards due to the risk of stone chips.

You may recognise this camera from a very expensive branded system, that's because we used the same factory to import it from except we had the very latest 600TVL 1/3" Sharp CCD (not to be confused with the older 420TVL 1/3" Sharp CCD).  We would say this new image sensor is on par with the Sony 700TVL we use in our other high end cameras.  This camera has a nice polished Stainless Steel Bracket with a grey/silver painted main body. 

Cable length of 5-20M can be selected inside listing. These cameras come with the 1/3" Sony CCD sensor and give a very good image.

White painted stainless steel bracket reversing camera to suit motorhomes/caravans/vans

This is one of our most popular cameras, especially with motorhome owners and van drivers. This has so much adjustment with the angles its just great. Eagle Eye view from above is possible with this great camera. Its got infra Red LED's for great vision at night time. It has a shade so it prevents sun glare and rain on the lens. Cable length of 5-20M can be selected inside listing.

A simple budget version of our popular bracket reversing camera. Comes with a cheaper CMOS image sensor, yet still has the stainless steel bracket that we have fitted on our higher up premium level cameras. This cameras outputs guidelines to the image, please kindly note that you cannot remove these from the image displayed.

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, with a high resolution, but still with IR LED's for night time.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, with a high resolution, but still with IR LED's for night time.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, but still with a high resolution.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, with a high resolution.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, with a high resolution.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, but still with a high resolution.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

We have stocked the Sony CCD version of the bracket reversing camera (from the same factory) for a number of years now. This is the new highest spec version using a relatively new technology called AHD. AHD is an open source Analogue High Definition technology that has become dominant in the industry.