Fixing Brackets for Monitors

This bracket is quite common amongst lots of vehicle monitors.  The unit can swivel left and right as well as back and forth.  There is a square washer that will fit in to the rear channel of the monitor then the bolt will screw in to this square washer using the rear thumb screw.  There is also a thumb screw on the left of the bracket to tighten the movement back and forth of the monitor.  Supplied with a self adhesive base, the "butterfly wings" can be bent to match the curves of your dashboard.

This fits any of our monitors with the slide channel mounting on the back. Which is currently all our 5 and 7" monitors. It has a part that stays on the slider mechanism and clicks into place on the bracket, which remains on the dashboard. There is a thumb release switch on the back of the bracket that allows the user to unclick the monitor quickly from the bracket base.

We often get calls from people wishing to fit a dash monitor to a similar location to the rear view mirror. This bracket works with most of our monitors, the metal locator fits to the rear channel of the monitor and you twist the tightening wheel to lock the monitor in to position. The left hand side thumb screw allows the monitor to twist left or right and tilt up and down.

This fits any of our monitors with the slide mounting on the back.

This bracket allows you to mount one of our stand / dash monitors to attach to the windscreen.  The bracket comes with a Ford/Universal metal mounting plate as standard to fit in to the bracket.  We have optional loctite 319 windscreen button mounting adhesive to fix this to the windscreen.  We also have optional mounting plates to convert some popular mounting plates/buttons in to the same shape as a Ford button for this bracket to attach to.  

The metal groove slides in to the rear channels on most of our dash monitors, once at the desired position you will tighten the rear screw to lock the bracket and monitor in position.  The bracket has two ball joints for getting your desired angle.  

We recommend not being too forceful when adjusting the angle whilst the bracket is attached to the windscreen.  This is out of an abundance of precaution to avoid stress cracking the glass.

This bracket is similar to our quick release bracket and is still quite easy to remove the monitor if needed by unscrewing the adjustment wheel behind the friction pad.  The metal groove slides in to the rear channels on most of our dash monitors, once at the desired position you will tighten the rear screw to lock the bracket and monitor in position.  The bracket can be spun left and right and monitor back and forth using the side thumb screw to tighten and loosen to allow adjustment.  The base is designed to be bent to shape for curvy dashboards and has a self adhesive pad on the base.  Screw holes are present if you wish to screw it down to a surface and the feet can be cut if placing in a compact space.

We have encountered a different style of windscreen mount on some Mercedes Sprinter vans. We believe it is models that are fitted with either auto lights, or auto windscreen wipers.  This bracket will allow our bracket type mirror monitor to mount to this metal button.   Please see photo.

This mounting is typically seen on Ford vans, as well as some others.

This mounting is typically seen on later Ducato/Relay/Boxer vans.

This bundle combines our ACCMB2 Ford/Universal bracket, together with a Ford/Universal windscreen "button", and the Loctite 319 rear view mirror button adhesive kit.

Rear View Mirror Monitor Mounting Bracket that attaches to the Windscreen Mirror Mounting plate that is usually found on VW Volkswagen vehicles such as the Transporter, Crafter, Caddy, and many more. The bracket is designed to attach to Bracket Mirror Monitors that have the 4 (sometimes 6) screws on the rear to facilitate mounting. The other side twists on to the existing windscreen button/mounting plate found on the vehicle. 

This mounting is typically seen on Mercedes Sprinter / Vito vans, as well as some Iveco vans, and the pre-2017 VW crafter.

This mounting allows the bracket mirror monitor to be mounted on to the ceiling.

This mounting is typically seen on earlier Ducato/Relay/Boxer/Iveco vans. This bracket is designed to mate with the OEM windscreen stub, so that a mirror monitor with a 4 screw mounting point can attach to it.

Rear View Mirror Monitor Mounting Bracket that attaches to the Windscreen Mirror Mounting plate that is usually found on a lot of Renault Master vans, as well as Nissan NV400, and Vauxhall Movano/Vivaro. The bracket is designed to attach to Bracket Mirror Monitors that have the 4 (sometimes 6) screws on the rear to facilitate mounting. The other side slides up on to the existing windscreen button/mounting plate found on the vehicle.