Reversing Cameras

This is our biggest selling reversing camera and is supplied as standard with a number of our 12/24V reversing camera kits. The 4 pin connector enables a nice waterproof connection between the 4 pin lead and the camera. The 4 pin leads carry both power and video down the one cable.
 

This is our biggest selling reversing camera and is supplied as standard with a number of our 12/24V reversing camera kits. The 4 pin connector enables a nice waterproof connection between the 4 pin lead and the camera. The 4 pin leads carry both power and video down the one cable.
 

These are the latest technology version of the very popular twin lens bracket camera we do.  These have a slightly different design bracket, looks more modern.  The bracket is made from stainless steel (we are one of the very rare sellers to have this) and will last a long time without rust.  The image sensors are 1/3" Sony CCD meaning a better picture day and night compared to the 1/4" Sony and CMOS versions out there.  These use the 4 pin connector cables found on our 4 pin connector monitors.
 

This is the bolt version number plate reverse camera.  Simply drill a small hole on the underside of your number plate ledge for the bolt of the camera to fit through.  Then fasten to vehicle with the special split type nut provided.  The result is a very small camera that is quite hard to even see!  We have had this made by the same factory that makes our upgraded brake light cameras.  Using their high quality PC4089 700TVL sensor and fully glass composite lens combination.  

These are the latest technology version of the very popular twin lens bracket camera we do.  These have a slightly different design bracket, looks more modern.  The bracket is made from stainless steel (we are one of the very rare sellers to have this) and will last a long time without rust.  The image sensors are 1/3" Sony CCD meaning a better picture day and night compared to the 1/4" Sony and CMOS versions out there.  These use the 4 pin connector cables found on our 4 pin connector monitors.
 

We kept getting asked for a numberplate camera with night vision that has a good quality picture.  Well here it is.

White slimline parking camera, ideal for fitting to a Motorhome or Van. It can be mounted either to the number plate or higher up to give a bird's-eye view. Fitted with a quality 700tvl PC4089 image sensor for good colour replication and a sharp image.

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, but still with a high resolution.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, with a high resolution.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

We used to stock a similar reversing camera many years ago.  When we found this one, which had the higher quality image sensor options available we gladly ordered some.  These were always a popular, easy to fit option for people wanting a small, discreet camera.  The actual camera part itself is only 22mm deep and 18mm in height, it is attached to a bracket that is mostly hidden behind the numberplate itself.  You have the option of using screws to attach this, or my preference is either an adhesive sealant, or some very strong tape such as Scotch Red.

This uses the same image sensor and lens combination that we have fitted to our brake light cameras. Cable length of 5-20M can be selected inside listing.

This uses the same image sensor and lens combination that we have fitted to our brake light cameras. Cable length of 5-20M can be selected inside listing.

High resolution CCD camera, with infrared illumination at night, waterproof, 12 month guarantee and a 5m RCA video cable. The important thing about CCD cameras is they give a much better image than the cheaper CMOS versions. Cable length of 5-20M can be selected inside listing.
 

White painted stainless steel bracket reversing camera to suit motorhomes/caravans/vans

This is the compact version of our CCD bracket camera.

This is a very nice white dome camera that comes with our best image sensor. Cable length of 5-20M can be selected inside listing. These cameras come with the 1/3" Sony CCD sensor and give a very good image.

This is the compact version of our CCD bracket camera.

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, with a high resolution, but still with IR LED's for night time.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, with a high resolution, but still with IR LED's for night time.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

We have stocked a twin lens camera for more than a decade that uses two cameras with a compact 50mm width case. Because we frequently get asked by customers if they can use just the one in a small bracket, and because we like to listen and learn from customers, we decided to get a bracket specially produced to house our large selection of twin lens camera units. The unit fitted to the camera provided in this listing is the 120° wide angle parking/reversing camera. The camera body is painted black, whilst the bracket is polished stainless steel. The image sensor fitted is Sony's 811, which is our favourite sensor - 1/3" CCD 700tvl.

We have stocked a twin lens camera for more than a decade that uses two cameras with a compact 50mm width case. Because we frequently get asked by customers if they can use just the one in a small bracket, and because we like to listen and learn from customers, we decided to get a bracket specially produced to house our large selection of twin lens camera units. The unit fitted to the camera provided in this listing is the 45° narrow angle driving / rear view camera. The camera body is painted black, whilst the bracket is polished stainless steel. The image sensor fitted is Sony's 811, which is our favourite sensor - 1/3" CCD 700tvl.

We have stocked a twin lens camera for more than a decade that uses two cameras with a compact 50mm width case. Because we frequently get asked by customers if they can use just the one in a small bracket, and because we like to listen and learn from customers, we decided to get a bracket specially produced to house our large selection of twin lens camera units. The unit fitted to the camera provided in this listing is the 120° wide angle parking/reversing camera. The camera body is painted white, whilst the bracket is polished stainless steel. The image sensor fitted is Sony's 811, which is our favourite sensor - 1/3" CCD 700tvl.

We have stocked a twin lens camera for more than a decade that uses two cameras with a compact 50mm width case. Because we frequently get asked by customers if they can use just the one in a small bracket, and because we like to listen and learn from customers, we decided to get a bracket specially produced to house our large selection of twin lens camera units. The unit fitted to the camera provided in this listing is the 45° narrow angle driving / rear view camera. The camera body is painted white, whilst the bracket is polished stainless steel. The image sensor fitted is Sony's 811, which is our favourite sensor - 1/3" CCD 700tvl.

This uses the same image sensor and lens combination that we have fitted to our brake light cameras. Cable length of 5-20M can be selected inside listing.