Bracket / Dash Mount Monitors for reversing cameras

This monitor is the best version of the 5" stand On Dash monitor. This model has a Hi-Res Screen, voltage stabiliser and works both 12V and 24V.  It is compatible with our 4 Pin Connector Cameras and 4 Pin Connector Cables.  This monitor has three inputs.  This monitor has an optional reverse trigger wire which would turn the monitor on and off depending on if it's in reverse. Comes with two brackets, one for a curvy dashboard and the original u shaped bracket for flat dashboards.

This monitor is one of our newest.  This has a sunshade to prevent glare in sun and glare on the windscreen when using at night. This model has a Hi-Res Screen, voltage stabiliser and works both 12V and 24V.  It is compatible with our 4 Pin Connector Cameras and 4 Pin Connector Cables.  This has two inputs.  This monitor has a green trigger wire (which is optional if you wish to use or not).  When attached to the reverse light feed, it will switch the monitor on and select channel 2.  If already on it will change channel to number 2.

This has a sunshade to prevent glare in sun and glare on the windscreen when using at night. This model has a Hi-Res Screen, voltage stabiliser and works both 12V and 24V.  It is compatible with our 4 Pin Connector Cameras and 4 Pin Connector Cables.  This has two inputs.  This monitor has a green trigger wire (which is optional if you wish to use or not).  When attached to the reverse light feed, it will switch the monitor on and select channel 2.  If already on it will change channel to number 2.

This monitor is one of our newest.  This has a sunshade to prevent glare in sun and glare on the windscreen when using at night. This model has a Hi-Res Screen, voltage stabiliser and works both 12V and 24V.  It is compatible with our 4 Pin Connector Cameras and 4 Pin Connector Cables.  This has three inputs.  This monitor has trigger wires (which is optional if you wish to use or not).  When attached to the reverse light feed/indicator power, it will switch the monitor on and select the channel. 

This monitor is one of our newest.  This has a sunshade to prevent glare in sun and glare on the windscreen when using at night. This model has a Hi-Res Screen, voltage stabiliser and works both 12V and 24V. This has two inputs.  This monitor has a green trigger wire (which is optional if you wish to use or not).  When attached to the reverse light feed, it will switch the monitor on and select channel 2.  If already on it will change channel to number 2.

This monitor is one of our newest.  This has a sunshade to prevent glare in sun and glare on the windscreen when using at night. This model has a Hi-Res Screen, voltage stabiliser and works both 12V and 24V.  It is compatible with our 4 Pin Connector Cameras and 4 Pin Connector Cables.  This has three inputs.  This monitor has trigger wires (which is optional if you wish to use or not).  When attached to the reverse light feed/indicator power, it will switch the monitor on and select the channel. 

We brought these in mainly for agricultural customers who either have very dusty environments or where the monitors will be exposed to the elements and covered in rain. See the photo's inside to see how we placed the monitor inside a fish tank to demonstrate its abilities.

This is a very flexible monitor, enabling upto 4 cameras to be displayed on the screen at one time. If you only have 2 cameras attached it can view both of these at the same time. Power to the cameras come from the monitor, meaning you don't need to wire in any additional power leads. Most people that order these have 2 side cameras and 2 rear view cameras giving massive coverage. This monitor works with our 4 pin cameras and 4 pin cables.

Upto 4 Inputs! 10" Screen! Split screen functions and High Res Screen whilst monitor powers up all the cameras! Works with 12-24V systems.

This AHD monitor has two hybrid channel inputs capable of displaying both standard definition cameras, as well as the latest 720P/960P/1080P output AHD reversing cameras

• High Quality 7" IPS Panel Display - This is the most popular size display for vehicle monitors. Really colourful and sharp 1024*600 pixel 7 inch IPS display. IPS panels are seen in the gaming community thanks to their high definition, ability to display bright-vivid colours, and their wide viewing-angle (allows clear visibility even when you are positioned at an angle to the display).
• 3 Channel Inputs (up to 1080P AHD) - The monitor wiring is fitted with 3 channel inputs, which are controlled either via the Ch1, Ch2, and Ch3 buttons on the display, the remote control, or via trigger activation wires, e.g. reverse light (3 wires supplied if you wish to use).
• Removable Sunshade - If you have a bright cabin in your vehicle, you can use the supplied sunshade to prevent glare on the screen. This is easily removable at any time.
• Works on 12V and 24V Vehicles - This monitor can work on Vans, Motorhomes, HGL, LGV, etc., thanks to the 12-32V working voltage range. It will protect the cameras by ensuring a stabilised 12V supply is sent down the 4-pin cable.  
• Heavy-Duty Side Mounting Bracket Supplied - This monitor has a heavy-duty "u" bracket that attaches to the side mounting points. This durable bracket strongly holds the monitor securely in even the bumpiest environments. The bracket can be inverted to hang the monitor from the ceiling (if desired).
• Optional Brackets Available to fit Rear - The monitor is equipped with a rear central channel, allowing our large range of vehicle monitor mounting brackets to be fitted.

• Large High Quality 9" IPS Panel Display - This is one of our larger monitors, ideal for vehicles with a large dashboard. Really colourful and sharp 1024*600 pixel 9 inch IPS display. IPS panels are seen in the gaming community thanks to their high definition, ability to display bright-vivid colours, and their wide viewing-angle (allows clear visibility even when you are positioned at an angle to the display).
• 3 Channel Inputs (up to 1080P AHD) - The monitor wiring is fitted with 3 channel inputs, which are controlled either via the Ch1, Ch2, and Ch3 buttons on the display, the remote control, or via trigger activation wires, e.g. reverse light (3 wires supplied if you wish to use).
• Removable Sunshade - If you have a bright cabin in your vehicle, you can use the supplied sunshade to prevent glare on the screen. This is easily removable at any time.
• Works on 12V and 24V Vehicles - This monitor can work on Vans, Motorhomes, HGL, LGV, etc., thanks to the 12-32V working voltage range. It will protect the cameras by ensuring a stabilised 12V supply is sent down the 4-pin cable.
• Heavy-Duty Side Mounting Bracket Supplied - This monitor has a heavy-duty "u" bracket that attaches to the side mounting points. This durable bracket strongly holds the monitor securely in even the bumpiest environments. The bracket can be inverted to hang the monitor from the ceiling (if desired).
• Optional Brackets Available to fit Rear - The monitor is equipped with a rear central channel, allowing our large range of vehicle monitor mounting brackets to be fitted.

This is a very flexible monitor, enabling upto 4 cameras to be displayed on the screen at one time. If you only have 2 cameras attached it can view both of these at the same time. Power to the cameras come from the monitor, meaning you don't need to wire in any additional power leads. Most people that order these have 2 side cameras and 2 rear view cameras giving massive coverage. This monitor works with our 4 pin cameras and 4 pin cables.

4 Channel Split Screen Monitor that can accept up to 4 vehicle side view, rear view, and reversing cameras. Full-screen or split in one of various arrangements on screen. Advanced menu system to make alterations to settings. Full screen, 50/50 split, three-way, quad pattern split screen display. Can accept CVBS, 720P/960P/1080P AHD signal cameras. Heavy-Duty U Bracket. Instructions included, see download section of listing.

Ideal for pedestrian and cyclist safety, this large 10 inch IPS panel display with touchscreen allows you to mark out boxes to provide alerts when a pedestrian or cyclist enters that area of concern. The monitor features basic recording at 360P when inserting up to a 256GB SD card. The touchscreen works well, and makes adjusting the settings and zones easier compared to using a remote control (which is also provided). Optimal set up is using 2x side cameras, 1 rear reversing camera, and 1 front facing camera.

This monitor is great for Car owners or those on a budget who can't fit a 7" screen on their dash or who don't want to replace their rear view mirror. The simplicity is great. There are no control boxes or filter boxes.  This monitor comes with two mounts that can be interchanged - one for dash mounting with a self adhesive pad and one for suction mount.