Brake Light Reversing Camera Kits

This is a reversing camera kit for Iveco Daily vans built between 2014 and 2022 with a 5" dash monitor display. The reverse camera is designed to fit the high-level brake light for a tidy factory fit appearance. It has an ultra-wide angle for maximum safety while parking. High-quality image sensor, display, and cabling. Comes with a two-year guarantee from the trusted REVCAMUK team.

• This brake light reversing camera supplied in this kit is the most popular type of reverse camera for Fiat Ducato, Peugeot Boxer, Citroen Relay vans built between 2006-present, and more recently 2022+ new model Movano vans.
• Simply remove the existing brake light and insert the new brake light supplied in this kit with the built in reverse camera.  The existing brake light wire will need connecting up to the new wire provided.
• The 7" display used in this kit is one of the best we have ever seen, it comes from a very reliable and good quality factory - not to be confused with other similar cheap and cheerful monitors sold elsewhere.
• Either use the static guidelines that the brake light reversing camera generates, or turn these off, and use the programmable guideline function of this top of the range monitor (requires connection to reverse light).
• The monitor has a green reverse trigger wire, if you attach this to a reverse light feed, then the monitor/camera will trigger ON/OFF with reverse gear.  
• The monitor provides power to the camera, so just one power feed is required to produce a picture.  This also means that you can turn the camera on at any time you wish, including full time.  Please note that the camera will be angled down (optimised for parking), so would not see all the way down the road.
• Avoids CANBUS issues as the monitor powers the camera from the power supply at the front.
• There are half a dozen brake light camera manufacturers.  We use the one that in our experience has the best image sensor, lens quality, and reliability.  They may not be the cheapest option, but quality and reliability is important to both us and our regular customers.
• 2 Year Guarantee with us, in the unlikely event anything should go wrong.

• This brake light reversing camera supplied in this kit is the most popular type of reverse camera for Fiat Ducato, Peugeot Boxer, Citroen Relay vans built between 2006-present, and more recently 2022+ new model Movano vans.
• Simply remove the existing brake light by pressing down the 3 tabs (top and bottom) with a small flat head screw driver to release the light strip.  Then insert in to the new brake light housing supplied in this kit with the built in reverse camera.
• The 7" display used in this kit is one of the best we have ever seen, it comes from a very reliable and good quality factory - not to be confused with other similar cheap and cheerful monitors sold elsewhere.
• Either use the static guidelines that the brake light reversing camera generates, or turn these off, and use the programmable guideline function of this top of the range monitor (requires connection to reverse light).
• The monitor has a green reverse trigger wire, if you attach this to a reverse light feed, then the monitor/camera will trigger ON/OFF with reverse gear.  
• The monitor provides power to the camera, so just one power feed is required to produce a picture.  This also means that you can turn the camera on at any time you wish, including full time.  Please note that the camera will be angled down (optimised for parking), so would not see all the way down the road.
• Avoids CANBUS issues as the monitor powers the camera from the power supply at the front.
• There are half a dozen brake light camera manufacturers.  We use the one that in our experience has the best image sensor, lens quality, and reliability.  They may not be the cheapest option, but quality and reliability is important to both us and our regular customers.
• 2 Year Guarantee with us, in the unlikely event anything should go wrong.

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL 960H image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL 960H image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 10 Metres (30ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL 960H image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 10 Metres (30ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL 960H image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the dash monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 10 Metres (30ft)  (or select other length in listing).

This system uses the dash monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the 7 inch dash mount monitor, which has a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the dash monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234). Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the dash monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234). Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the dash monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

• This brake light reversing camera supplied in this kit is the most popular type of reverse camera for Berlingo/Partner/Combo/ProAce City vans.
• Simply remove the existing brake light and replace with the one supplied in this kit with a built in camera.
• The 7" display used in this kit is one of the best we have ever seen, it comes from a very reliable and good quality factory - not to be confused with other similar cheap and cheerful monitors sold elsewhere.
• Either use the static guidelines that the brake light reversing camera generates, or turn these off, and use the programmable guideline function of this top of the range monitor (requires connection to reverse light).
• The monitor has a green reverse trigger wire, if you attach this to a reverse light feed, then the monitor/camera will trigger ON/OFF with reverse gear.  
• The monitor provides power to the camera, so just one power feed is required to produce a picture.  This also means that you can turn the camera on at any time you wish, including full time.  Please note that the camera will be angled down (optimised for parking), so would not see all the way down the road.
• Avoid CANBUS issues with this system - as the monitor powers the camera from the power supply at the front.
• There are half a dozen brake light camera manufacturers.  We use the one that in our experience has the best image sensor, lens quality, and reliability.  They may not be the cheapest option, but quality and reliability is important to both us and our regular customers.
• 2 Year Guarantee with us, in the unlikely event anything should go wrong.

This system uses the Dash monitor which has the most modern version of 5 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well.   We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 10 Metres (30ft)  (or select other length in listing).

This system uses the Dash monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well.   We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 10 Metres (30ft)  (or select other length in listing).

• Tidy Factory Look - The brake light reversing camera is designed to be an exact fit to the location of the existing high-level brake light, retaining a tidy factory-fitted appearance on your van. This camera retains your rear wash wipe waterjet with the correct size cut-out in the lens.
• Easy Installation - This camera uses the original mounting points making it easy to secure to vehicle.
• IP69K Waterproof - This camera is rated to IP69K, the highest rating you can get. This camera will easily cope with the strongest torrential downpours you may experience with the great British summer weather.
• Superb Image Quality - This camera is fitted with an upgraded 4089 image sensor, which gives great colour replication and also returns a high resolution—700tvl. The camera also boasts an all-glass lens, which lasts a lot longer than the cheaper plastic-glass lens available from elsewhere (ours avoids the UV fade issues).
• Ultra Wide Angle - Our brake light reversing camera boasts a 170-degree (diagonally measured) ultra-wide viewing angle. The extra wide angle gives you the wide angle required to avoid obstacles around the rear of your vehicle.
• Excellent Build Quality - We picked the best brake light camera manufacturer we have come across to build these cameras to our spec. They may cost us more to bring in, but the picture quality, customer satisfaction, and reliability is worth it.
• 2-Year Guarantee - The factory we use is happy to support the two-year guarantee we offer for the brake light cameras. Feel reassured that your purchase is protected by us - Reversing Cameras UK Ltd, aka REVCAMUK. If any non-user damage fault shows itself in the two-year post-sale period, we will swap the camera to ensure your vehicles reversing safety.
• Optional Guidelines - Choose to either have guidelines added to the image or removed - your choice.
• Choice of Monitor Mounting Options - Choose from our selection of monitor mounting brackets to get the best fitment for your new display.