White Motorhome Reversing camera with Sony CCD 700TVL image sensor and painted stainless steel bracket

Our White Painted Stainless Steel Bracket Reversing Camera looks great on a Motorhome or White Van. It is fitted with a Sony 1/3" CCD 700tvl image sensor for a great, colourful, high-resolution image. Fitted with 18 IR LEDs and with the Sony 811's great low-light level sensitivity, this camera has excellent night vision. Thanks to the painted stainless steel bracket, an excellent rust-resistant material, there are no worries regarding rusty brackets. 4 Pin waterproof screw locking connector cable, with the option to add one of our RCA adaptor bundle sets should you have an RCA Monitor or are fitting to a Stereo head unit.

Great Image Quality thanks to the Sony 1/3" CCD Image Sensor Fitted - The Sony 811 1/3" CCD image sensor has long been our favourite image sensor for reversing cameras. The image sensor is the part of the camera responsible for producing an image, so as you can imagine, it plays a massive part in the image quality you see. 

Flexible Mounting Bracket - Bracket cameras remain one of the most popular types for mounting on vehicles as a reversing camera. They are easy to fit and can be mounted in a position of your choice. Most commonly, these are mounted higher up, sometimes on a rear vertical wall, e.g. on the back of a Motorhome or Van, and sometimes on a horizontal surface, e.g. on the top of a door/roof.

IR Night Vision LED's - Thanks to the 18 IR LEDs and the great low light sensitivity of the installed Sony 811 1/3" CCD sensor, you can expect great night vision. Really important to illuminate the area behind the vehicle for the camera to help you see hazards/obstacles. Don't worry about the light affecting following drivers as it is invisible to the human eye - the camera sees and uses it.

IP68 Waterproof Protection - This camera is built to thrive in bad weather. The IP rating gives an "ingress protection" rating against dust and water. IP68 is very high and means that it can survive in the worst storms the Great British weather can throw at it.

Mirror Image for Rear View / Reversing - The reversing camera will send a mirror image to the monitor. This is essential for cameras pointing backwards, to ensure that the obstacles on your left are displayed to the left of the display - like a mirror does.

Rust Resistant Painted Stainless Steel Bracket - There's nothing worse than having a rusty, mild steel reversing camera leaving orange streaks down the back of your pride and joy Motorhome. We have seen other supplier's cameras with such rusty brackets that the camera is no longer supported. No such worry with this camera. This camera uses a rust-resistant stainless steel bracket painted with matt black paint. Time tested and proven to look great many, many years later.

120°Wide Viewing Angle - The camera has a nice wide viewing angle to help give maximum coverage and help to avoid obstacles behind the vehicle.

Added Reversing Safety - Most importantly, with almost a quarter of all vehicle accidents in the UK occurring when reversing, having a good quality reversing camera providing a nice, clear image for the driver to view whilst reversing will reduce the likelihood of vehicle damage or harm to others.

4 Pin Waterproof Screw Connector - We have been a fan of the 4 pin aviation screw connector since the early 2000's. We quickly decided to build up all of our range of reversing camera kits with this type of connector. Some of our competitors chose to use inferior proprietary connectors in an attempt to lock people in to buying overpriced replacements from them. We chose a universally wired-up connector and chose the business model of selling high-quality, high-specification products for the lowest price possible.

Anti-Corrosion Stainless Steel Camera Bracket

The camera has a stainless steel bracket, which is shown to last a very long time without corrosion, unlike mild steel we have seen from most other retailers, which tends to rust in a matter of a few months.

Image Sensor for Camera

An image sensor is the part of the camera that detects and captures information to make an image; there are various sizes of sensors, usually between 1/4" and 1/3", with the larger sensors able to capture more detail. In the old days, you used to have to pick CCD for quality as CMOS wasn't as good, this has changed recently with some advancements in CMOS technology (there are varying quality levels of CMOS to confuse matters). In this particular kit, we use the Sony 1/3" CCD 700TVL image sensor inside the camera. We consider this the joint best standard definition image sensor in terms of picture quality you can get on a reversing camera.