White Reversing Camera with Polished Stainless Steel bracket | Sony CCD | 4 pin connector | CAM111W-120

Price

£68.00

VAT Included £11.33
Availability IN STOCK
Product Code: CAM111W-120
Extension Cable?
Quantity
(from 1 to 49)

If you'd like this by

Order within ::

(Please select Next Day Delivery Option - Mainland UK only) Terms Apply

Description

About the Compact Polished Stainless Steel Bracket with White Sony CCD Reversing Camera with 4 pin Screw Connector

We have stocked a twin lens camera for more than a decade that uses two cameras with a compact 50mm width case. Because we frequently get asked by customers if they can use just the one in a small bracket, and because we like to listen and learn from customers, we decided to get a polished stainless steel bracket produced to house our large selection of twin lens camera units. 

  • Bracket reversing cameras such as this one are still the most popular style of camera, especially with motorhomes, caravans, HGV, and vans.
  • The camera bracket is made from corrosion resistant polished stainless steel.
  • The image sensor is made by Sony, it is a 1/3" CCD 700TVL image sensor.  This means you get good day and night picture.
  • There are night vision IR LED's fitted to allow you to see in the dark when parking.  These come on automatically as the light level drops.  The light is only visible to the camera, it won't shine distracting light at any vehicles behind you.
  • The reversing camera will send a mirror image to the monitor.  This is essential for cameras pointing backwards, to ensure that the obstacles on your left are displayed to the left of the display - like a mirror does.
  • The camera has a fly lead with a 4 pin screw connector (also known as an aviation connector).  This is our preferred type of connector.
  • The camera will cope with whatever the weather can throw at it as it is waterproof to IP68.
    The reversing camera has approximately 120 degree viewing angle (diagonally measured).
  • We have placed a small 8mm disconnect point on the cable from the camera to the 4 pin screw connector (15mm).  This is so you can reduce the hole size drilled for cable entry. This 8mm disconnect must be inside as it is not waterproof like the 4 pin connector is.  If you plan to run the cable externally, please leave us a customer note on the last page of checkout saying "no 8mm disconnect on camera fly lead", and we will send a version that does not have this feature.

Anti-Corrosion Stainless Steel Camera Bracket

The camera has a stainless steel bracket, which is shown to last a very long time without corrosion, unlike mild steel we have seen from most other retailers, which tends to rust in a matter of a few months.

stainless steel bracket for reversing camera

Image Sensor for Camera

An image sensor is the part of the camera that detects and captures information to make an image. In this reversing camera we are using the Sony 1/3" CCD 700TVL image sensor inside the camera.  We consider this the joint best image sensor in terms of picture quality you can get on a reversing camera on traditional CVBS technology.

image sensor inside camera

See our general guide to installing 4 pin reversing cameras.  This includes fitting to stereos inc Kenwood / Sony / Pioneer etc.

Fitting guide for 4 pin reversing cameras including to stereo headunits

Image Device:1/3 SONY 811 CCD 960H 700TVL
TV System: PAL
Effective Pixels: 976*582
Aspect Ratio of output: 4:3
Scanning System: 2:1 Interlace
Sync. System: Internal
Resolution: 700 TV lines
Minimum Illumination:0 Lux (IR LEDs on)
Waterproof to Ip68
Infrared LEDs to provide night view
120 degrees field of view (diagonal)
Mirror image
Stainless Steel Bracket