0 £0.00
Replacing faulty Elddis motorhome dome reversing cameras is something we have much experience with. The AW-9307 white dome rear view camera can be directly replaced with our CAM070W white dome reverse view camera. The footprint and grooves match. If you have a push fit 4 pin, then you will require an adaptor P, which we have had produced to the same "pin-out" spec as the original camera. We have a bundle kit below which has the camera + discounted adaptor set.
Camera bundle compatible with Elddis motorhomes to replace an AW9307 camera with 4 pin push fit
Elddis Bundle (push fit)
| This bundle supplies both camera and adaptor to replace a failed white dome reversing camera fitted to an Elddis motorhome / campervan. The bundle includes our white dome camera which has the 4 pin screw connector as standard, plus an adaptor to convert this to the 4 pin push fit connector found on approx 50% of the Elddis motorhomes with this type of camera. |
£84.00
VAT Included £14.00
Elddis Motorhome Dome Reverse Camera Adaptor | Adaptor-P
Adaptor-P
| Adaptor to convert the 4 pin aviation connector on our dome reversing cameras, to match the 4 pin push fit S-video connector commonly fitted to Elddis motorhomes with the white dome cameras. The OEM part number on the reversing camera is usually AW-9307. Our white dome reverse camera is the same size, and can be used with this adaptor to replace the original camera. |
£18.00
VAT Included £3.00
White Dome Reversing Camera | Sony CCD | 4 pin connector | CAM070W
CAM070W
| This is a very nice white dome camera that comes with our best image sensor. Cable length of 5-20M can be selected inside listing. These cameras come with the 1/3" Sony CCD sensor and give a very good image. |
