Small / Numberplate Reversing Cameras

We kept getting asked for a numberplate camera with night vision that has a good quality picture.  Well here it is.

We kept getting asked for a numberplate camera with night vision that has a good quality picture.  Well here it is.

We kept getting asked for a numberplate camera with night vision that has a good quality picture.  Well here it is.

White slimline parking camera, ideal for fitting to a Motorhome or Van. It can be mounted either to the number plate or higher up to give a bird's-eye view. Fitted with a quality 700tvl PC4089 image sensor for good colour replication and a sharp image.

We used to stock a similar reversing camera many years ago.  When we found this one, which had the higher quality image sensor options available we gladly ordered some.  These were always a popular, easy to fit option for people wanting a small, discreet camera.  The actual camera part itself is only 22mm deep and 18mm in height, it is attached to a bracket that is mostly hidden behind the numberplate itself.  You have the option of using screws to attach this, or my preference is either an adhesive sealant, or some very strong tape such as Scotch Red.

We used to stock a similar reversing camera many years ago.  When we found this one, which had the higher quality image sensor options available we gladly ordered some.  These were always a popular, easy to fit option for people wanting a small, discreet camera.  The actual camera part itself is only 22mm deep and 18mm in height, it is attached to a bracket that is mostly hidden behind the numberplate itself.  You have the option of using screws to attach this, or my preference is either an adhesive sealant, or some very strong tape such as Scotch Red.

This is the bolt version number plate reverse camera.  Simply drill a small hole on the underside of your number plate ledge for the bolt of the camera to fit through.  Then fasten to vehicle with the special split type nut provided.  The result is a very small camera that is quite hard to even see!  We have had this made by the same factory that makes our upgraded brake light cameras.  Using their high quality PC4089 700TVL sensor and fully glass composite lens combination.  

This is the bolt version number plate reverse camera.  Simply drill a small hole on the underside of your number plate ledge for the bolt of the camera to fit through.  Then fasten to vehicle with the special split type nut provided.  The result is a very small camera that is quite hard to even see!  We have had this made by the same factory that makes our upgraded brake light cameras.  Using their high quality PC4089 700TVL sensor and fully glass composite lens combination.  

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, with a high resolution.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, with a high resolution.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, but still with a high resolution.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, with a high resolution.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, with a high resolution.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, but still with a high resolution.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

A small, good quality reversing camera with a 1/4" Sony CCD image sensor fitted inside.

This camera is the latest on the market. One issue with CCD cameras is they need a lot of volume to take the electronics. This means traditionally they were relatively large. New developments mean this is no longer true and this camera is one of the first using this technology. It is designed to mount in the number plate area with its mounting bracket mounted above it.

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, with a high resolution, but still with IR LED's for night time.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, with a high resolution, but still with IR LED's for night time.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

We used to stock a similar reversing camera many years ago.  When we found this one, which had the higher quality image sensor options available we gladly ordered some.  These were always a popular, easy to fit option for people wanting a small, discreet camera.  The actual camera part itself is only 22mm deep and 18mm in height, it is attached to a bracket that is mostly hidden behind the numberplate itself.  You have the option of using screws to attach this, or my preference is either an adhesive sealant, or some very strong tape such as Scotch Red.

We used to stock a similar reversing camera many years ago.  When we found this one, which had the higher quality image sensor options available we gladly ordered some.  These were always a popular, easy to fit option for people wanting a small, discreet camera.  The actual camera part itself is only 22mm deep and 18mm in height, it is attached to a bracket that is mostly hidden behind the numberplate itself.  You have the option of using screws to attach this, or my preference is either an adhesive sealant, or some very strong tape such as Scotch Red.

We have stocked two versions of this reversing camera (from the same factory) for a number of years now. This is the highest spec version using a relatively new technology called AHD. AHD is an open source Analogue High Definition technology that has become dominant in the industry.

The factory that produces this camera is the only factory we would trust to produce this cylindrical style reversing camera. Similar looking cameras are notorious for leaking. The cameras that come from the factory we use just simply don't have this issue. We pay around double the price of other factories similar looking products, but in terms of build quality, reliability, and performance, it is well worth the extra. You get what you pay for.

We have stocked two versions of this reversing camera (from the same factory) for a number of years now. This is the highest spec version using a relatively new technology called AHD. AHD is an open source Analogue High Definition technology that has become dominant in the industry.

The factory that produces this camera is the only factory we would trust to produce this cylindrical style reversing camera. Similar looking cameras are notorious for leaking. The cameras that come from the factory we use just simply don't have this issue. We pay around double the price of other factories similar looking products, but in terms of build quality, reliability, and performance, it is well worth the extra. You get what you pay for.

New for 2024. A white slimline number plate camera produced by the factory that makes our brake light cameras, with their 2399 1080P image sensor fitted and all glass composite lens. Good quality picture, suitable for AHD compatible screens and displays that can accept 1080P rear camera inputs.