4 Pin Screw Connector Reversing Cameras

This is our biggest selling reversing camera and is supplied as standard with a number of our 12/24V reversing camera kits. The 4 pin connector enables a nice waterproof connection between the 4 pin lead and the camera. The 4 pin leads carry both power and video down the one cable.
 

We get asked by some people for a camera they can make normal view instead of mirror (perhaps as an internal camera or a camera looking forwards or to the side).  Although we wouldn't recommend it low down looking forwards due to the risk of stone chips.

You may recognise this camera from a very expensive branded system, that's because we used the same factory to import it from except we had the very latest 600TVL 1/3" Sharp CCD (not to be confused with the older 420TVL 1/3" Sharp CCD).  We would say this new image sensor is on par with the Sony 700TVL we use in our other high end cameras.  This camera has a nice polished Stainless Steel Bracket with a grey/silver painted main body. 

This is our biggest selling reversing camera and is supplied as standard with a number of our 12/24V reversing camera kits. The 4 pin connector enables a nice waterproof connection between the 4 pin lead and the camera. The 4 pin leads carry both power and video down the one cable.
 

This is one of our biggest selling reversing camera and is supplied as standard with a number of our 12/24V reversing camera kits. The 4 pin connector enables a nice waterproof connection between the 4 pin lead and the camera. The 4 pin leads carry both power and video down the one cable.
 

High resolution CCD camera, with infrared illumination at night, waterproof, 12 month guarantee and a 5m RCA video cable. The important thing about CCD cameras is they give a much better image than the cheaper CMOS versions. Cable length of 5-20M can be selected inside listing.
 

We kept getting asked for a numberplate camera with night vision that has a good quality picture.  Well here it is.

We kept getting asked for a numberplate camera with night vision that has a good quality picture.  Well here it is.

We kept getting asked for a numberplate camera with night vision that has a good quality picture.  Well here it is.

White slimline parking camera, ideal for fitting to a Motorhome or Van. It can be mounted either to the number plate or higher up to give a bird's-eye view. Fitted with a quality 700tvl PC4089 image sensor for good colour replication and a sharp image.

We used to stock a similar reversing camera many years ago.  When we found this one, which had the higher quality image sensor options available we gladly ordered some.  These were always a popular, easy to fit option for people wanting a small, discreet camera.  The actual camera part itself is only 22mm deep and 18mm in height, it is attached to a bracket that is mostly hidden behind the numberplate itself.  You have the option of using screws to attach this, or my preference is either an adhesive sealant, or some very strong tape such as Scotch Red.

A small, good quality reversing camera with a 1/4" Sony CCD image sensor fitted inside.

These are the latest technology version of the very popular twin lens bracket camera we do.  These have a slightly different design bracket, looks more modern.  The bracket is made from stainless steel (we are one of the very rare sellers to have this) and will last a long time without rust.  The image sensors are 1/3" Sony CCD meaning a better picture day and night compared to the 1/4" Sony and CMOS versions out there.  These use the 4 pin connector cables found on our 4 pin connector monitors.
 

These are the latest technology version of the very popular twin lens bracket camera we do.  These have a slightly different design bracket, looks more modern.  The bracket is made from stainless steel (we are one of the very rare sellers to have this) and will last a long time without rust.  The image sensors are 1/3" Sony CCD meaning a better picture day and night compared to the 1/4" Sony and CMOS versions out there.  These use the 4 pin connector cables found on our 4 pin connector monitors.
 

We have stocked a twin lens camera for more than a decade that uses two cameras with a compact 50mm width case. Because we frequently get asked by customers if they can use just the one in a small bracket, and because we like to listen and learn from customers, we decided to get a bracket specially produced to house our large selection of twin lens camera units. The unit fitted to the camera provided in this listing is the 45° narrow angle driving / rear view camera. The camera body is painted black, whilst the bracket is polished stainless steel. The image sensor fitted is Sony's 811, which is our favourite sensor - 1/3" CCD 700tvl.

We have stocked a twin lens camera for more than a decade that uses two cameras with a compact 50mm width case. Because we frequently get asked by customers if they can use just the one in a small bracket, and because we like to listen and learn from customers, we decided to get a bracket specially produced to house our large selection of twin lens camera units. The unit fitted to the camera provided in this listing is the 120° wide angle parking/reversing camera. The camera body is painted black, whilst the bracket is polished stainless steel. The image sensor fitted is Sony's 811, which is our favourite sensor - 1/3" CCD 700tvl.

This is the compact version of our CCD bracket camera.

This is the compact version of our CCD bracket camera.

We have stocked a twin lens camera for more than a decade that uses two cameras with a compact 50mm width case. Because we frequently get asked by customers if they can use just the one in a small bracket, and because we like to listen and learn from customers, we decided to get a bracket specially produced to house our large selection of twin lens camera units. The unit fitted to the camera provided in this listing is the 45° narrow angle driving / rear view camera. The camera body is painted white, whilst the bracket is polished stainless steel. The image sensor fitted is Sony's 811, which is our favourite sensor - 1/3" CCD 700tvl.

We have stocked a twin lens camera for more than a decade that uses two cameras with a compact 50mm width case. Because we frequently get asked by customers if they can use just the one in a small bracket, and because we like to listen and learn from customers, we decided to get a bracket specially produced to house our large selection of twin lens camera units. The unit fitted to the camera provided in this listing is the 120° wide angle parking/reversing camera. The camera body is painted white, whilst the bracket is polished stainless steel. The image sensor fitted is Sony's 811, which is our favourite sensor - 1/3" CCD 700tvl.

This is a new camera which will clamp on to most tubes whether it be side mirror tubes or bike racks.

This uses the same image sensor and lens combination that we have fitted to our brake light cameras. Cable length of 5-20M can be selected inside listing.

This is the same camera as our CAM070W, the only difference being the body of the camera is black. Cable length of 5-20M can be selected inside listing.

This uses the same image sensor and lens combination that we have fitted to our brake light cameras. Cable length of 5-20M can be selected inside listing.