Toyota Proace

• Reversing brake light camera to fit Peugeot Expert 2016-Present, Peugeot Traveller 2019-Present, Vauxhall Vivaro 2019-Present, and Toyota Proace 2016-Present vans.
• Top quality 7 inch rear view mirror monitor display, with options to either clip over existing mirror, or attach directly to the windscreen fitment.
• Swan neck brackets are selectable depending on the metal windscreen fitment/button that is present on your van. 
• If you have nothing present, we can supply a swan neck bracket that allows you to add a fitting/button (with loctite 319 glue).
• 2 Year Guarantee with the specialists - Reversing Cameras UK Ltd.

Reversing Camera Kit to fit Peugeot Expert / Travellor, Vauxhall Vivaro C, and Toyota ProAce, comes with :

• Great Camera Image Quality - We don't settle for the base image sensor when it comes to our cameras. We have had the PC4089 700tvl image sensor installed combined with our all-glass composite lens to ensure a crystal clear, colourful image for many years to come.
• High Resolution Digital Display Monitor - The monitor comes from one of our long term tried-and-tested reliable factories. We have it fitted with a good quality 800x480 digital high resolution LCD panel, which is essential for showing the cameras image of to its best potential.
• Two Year Guarantee - Our brake light factory is one of the best around, with a great reputation for longevity with their cameras. They fully support our two year guarantee on the brake light cameras, which we pass on to you. The cabling and monitor is also covered by the two year guarantee.
• Great OEM Appearance - This brake light camera retains the factory look of the vehicle, whilst adding an additional layer of safety.
• IP69K Waterproof Protection - The maximum ingress protection / waterproof rating you can get. Be assured that this camera will not suffer from being exposed to the Great British weather at its wettest.
• Extra Wide Field Of View - Very wide 170 degrees field of view to give you the maximum visibility to the rear of your van.
• Increased Safety - This camera will help to increase the safety of your vehicle, by giving you greater visibility in a traditionally poor visibility area. Nearly 25% of all vehicle accidents in the UK occur whilst reversing, don't be another statistic and protect yourself and others today with this top spec product.
• No CANBUS Issues - Thanks to the reusing of your OEM light strip (very easy - see instructions tab) and the monitor powering the reverse camera, you won't experience any issues of CANBUS cutting power to the rear light/camera.
• 1st Class Service and Support - We pride ourselves on going above and beyond with service. Expect fast delivery and great support when you purchase with us.

High quality reversing camera kit to fit the Peugeot Expert / Traveller vans built from 2016, as well as Vauxhall Vivaro C models built after 2019, and Toyota ProAce vans built after 2016. 700tvl high resolution image sensor, great colourful image, two year guarantee. Accepts the original OEM light strip.

• Great Camera Image Quality - We don't settle for the base image sensor when it comes to our cameras. We have had the PC4089 700tvl image sensor installed combined with our all-glass composite lens to ensure a crystal clear, colourful image for many years to come.
• High Resolution Digital Display Monitor - The monitor comes from one of our long term tried-and-tested reliable factories. We have it fitted with a good quality 800x480 digital high resolution LCD panel, which is essential for showing the cameras image of to its best potential.
• Two Year Guarantee - Our brake light factory is one of the best around, with a great reputation for longevity with their cameras. They fully support our two year guarantee on the brake light cameras, which we pass on to you. The cabling and monitor is also covered by the two year guarantee.
• Great OEM Appearance - This brake light camera retains the factory look of the vehicle, whilst adding an additional layer of safety.
• IP69K Waterproof Protection - The maximum ingress protection / waterproof rating you can get. Be assured that this camera will not suffer from being exposed to the Great British weather at its wettest.
• Extra Wide Field Of View - Very wide 170 degrees field of view to give you the maximum visibility to the rear of your van.
• Increased Safety - This camera will help to increase the safety of your vehicle, by giving you greater visibility in a traditionally poor visibility area. Nearly 25% of all vehicle accidents in the UK occur whilst reversing, don't be another statistic and protect yourself and others today with this top spec product.
• No CANBUS Issues - Thanks to the reusing of your OEM light strip (very easy - see instructions tab) and the monitor powering the reverse camera, you won't experience any issues of CANBUS cutting power to the rear light/camera.
• 1st Class Service and Support - We pride ourselves on going above and beyond with service. Expect fast delivery and great support when you purchase with us.

This system uses the dash monitor which has the most modern version of 5 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

Reversing Camera Kit to fit the Citroen Berlingo 2008-Present, Peugeot Partner 2008-Present, Vauxhall Combo 2018-Present, and Toyota ProAce City 2019-Present vans. The brake light camera supplied in this kit is designed to replace the OEM brake light and increase reversing safety thanks to the built-in reverse camera. Comes with a top-quality mirror monitor, a choice of either a clip-over original mirror type or bracket direct to the windscreen type display, plus various power options, including easy to hardwire piggyback fuse holder leads. 2 Year Guarantee with us, and lifetime support, e.g. low-cost monitor repairs outside of guarantee.

• This brake light reversing camera supplied in this kit is the most popular type of reverse camera for Berlingo/Partner/Combo/ProAce City vans.
• Simply remove the existing brake light and replace with the one supplied in this kit with a built in camera.
• The 7" display used in this kit is one of the best we have ever seen, it comes from a very reliable and good quality factory - not to be confused with other similar cheap and cheerful monitors sold elsewhere.
• Either use the static guidelines that the brake light reversing camera generates, or turn these off, and use the programmable guideline function of this top of the range monitor (requires connection to reverse light).
• The monitor has a green reverse trigger wire, if you attach this to a reverse light feed, then the monitor/camera will trigger ON/OFF with reverse gear.  
• The monitor provides power to the camera, so just one power feed is required to produce a picture.  This also means that you can turn the camera on at any time you wish, including full time.  Please note that the camera will be angled down (optimised for parking), so would not see all the way down the road.
• Avoid CANBUS issues with this system - as the monitor powers the camera from the power supply at the front.
• There are half a dozen brake light camera manufacturers.  We use the one that in our experience has the best image sensor, lens quality, and reliability.  They may not be the cheapest option, but quality and reliability is important to both us and our regular customers.
• 2 Year Guarantee with us, in the unlikely event anything should go wrong.

Our top-quality brake light reverse camera is designed to replace the OEM brake light on 2008+ Citroen Berlingo and Peugeot Partner vans, 2018+ Vauxhall Combo, and 2019+ Toyota Pro Ace City. Retrofitting our top-specification brake light reversing camera allows you to retain the factory look and add an extra layer of safety to avoid injury to property or pedestrians. 4089 image sensor, 2-year guarantee, pure glass lens, and top build quality, everything you would expect from the forum favourites.

High quality camera to fit the Peugeot Expert / Traveller vans built from 2016, as well as Vauxhall Vivaro C models built after 2019, and Toyota ProAce vans built after 2016. 700tvl high resolution image sensor, great colourful image, two year guarantee. Accepts the original OEM light strip.

This brake light camera replaces your existing brake light housing with one that incorporates a reversing camera.