0 £0.00
Our selection of reversing and rearview cameras to fit the Vauxhall Movano van. We stock both the triangular type brake light reverse camera to fit the 2010-2021 Movano "B" models, and a selection of 3 different types to fit the high-level brake light of the 2021-Present Movano "C" models.
Rest assured that all of the brake light cameras we stock are built to last and perform. Due to their build quality, the factory that makes our cameras has extended its guarantee to 2 years. In the unlikely event of a fault, we will ensure that the camera is replaced quickly.
All of the brake light reverse cameras listed are fitted with the upgraded 4089 high-resolution 700tvl image sensor, so you can expect good colour replication and a sharp picture. We also selected to have all-glass composite lenses, instead of the glass-plastic composites commonly found on cheaper cameras (we avoid these as the plastic fades due to UV exposure over time).
Renault Master, Nissan NV400, Vauxhall Movano Brake Light Reversing Camera | CAM401
CAM401
| This camera has been designed to take your old bulb out of the Vauxhall Movano, Renault Master and place in to the moulding off the new brake light housing and have the camera built in to give you a good birds eye image. |
£90.00
VAT Included £15.00
Fiat Ducato, Citroen Relay, Peugeot Boxer, Vauxhall Movano brake light reversing camera - slimline version | CAM1722
CAM1722-Version 2
| If you are looking for a reversing camera for the 2006 to present Fiat Ducato, Citroen Relay, or Peugeot Boxer van, then this is a good choice for you. Screw from the front using original screws, or bolt from the rear using the supplied nuts/bolts. Great image quality, durable build quality, increased safety, and a two year guarantee. |
£90.00
VAT Included £15.00
Fiat Ducato, Citroen Relay, Peugeot Boxer, Vauxhall Movano brake light reversing camera - screw version | CAM1723
CAM1723
| Our top-selling single brake light reversing camera to fit the 2006 to present Peugeot Boxer, Fiat Ducato, and Citroen Relay vans, as well as the 2022+ Vauxhall Movano vans based on the same platform. This camera is designed to fit where the original high-level brake light did. In fact, the brake light uses the OEM light strip and original fixing screws. A two-year guarantee from the trusted reversing camera specialists - REVCAMUK, the quality image from the high spec PC4089 image sensor and all glass external wide angle lens, plus fast dispatch, why look elsewhere? |
£90.00
VAT Included £15.00
Fiat Ducato, Citroen Relay, Peugeot Boxer, Vauxhall Movano Twin Reversing Camera / Rear View Camera for brake light | CAM1723TW
CAM1723TW
| Retrofit brake light reversing camera + rear view camera to fit the Citroen Relay, Peugeot Boxer, and Fiat Ducato vans built between 2006 and present. As of 2022, this camera now also fits Vauxhall Movano vans built from that year to the present. Achieve reversing safety, as well as improving your rear vision with the permanently on driving camera. The second camera is designed to help you to monitor traffic behind you. This means your brake light camera is useful 100% of the time instead of just the approximately 0.1-2% of your journey that you are backing up. Both cameras are high resolution with a quality PC4089 image sensor fitted. Two-year guarantee with the UK's forum favourite reversing camera specialists. |
£150.00
VAT Included £25.00Vauxhall Movano Reversing Camera for Brake Light
Please see our images and info below for an explanation of the 4 different types of reversing camera we stock for Vauxhall Movano vans.
Vauxhall Movano B (2010-2022)
This type shares its platform/design with the Renault Master and Nissan NV400. The brake light is triangular in shape and located halfway up the right-hand side rear door. We stock a direct replacement for this brake light. If you have this model please see our Vauxhall Movano 2010-2022 Brake Light Reversing Camera listing.
Vauxhall Movano C (2022+)
This type shares its platform/design with the long-running respected 2006 to present Fiat Ducato, Peugeot Boxer, and Citroen Relay vans. This is good, because it gives you the choice of three of our biggest selling brake light cameras. The 2022+ Movano vans have a choice of two styles of single reversing camera, and one style of twin reversing + rear view cameras. Please see the list below for the brief write up about each of these.
CAM1722 - Slimline style reversing camera for 2022+ Vauxhall Movano vans
This reversing camera is ideal if you just wanted a reverse only camera, and wanted it to be as flush with the bodywork panels as possible. The brake light camera comes built with its own LED brake light strip. This camera can either be bolted in from the rear of the van, or screwed in from the front. The camera has a bit of adjustment up/down, a very wide angle with 130 degrees horizontal field of view (160 degrees diagonal). Good night vision, especially coupled with it's external lens separated from the IR LED's.
CAM1723 - Regular version reversing camera for 2022+ Vauxhall Movano vans
This reverse camera is popular if you want just a standard reverse only camera. This camera is designed to utilise the light strip from the vans original brake light. This is achieved by removing the two screws from the front of your existing brake light, removing the light strip by releasing the 3x top tabs and the 3x bottom tabs, then transplanting that in to the new brake light reversing camera lens body. The camera has a bit of adjustment up/down, a very wide angle with 130 degrees horizontal field of view (160 degrees diagonal). Good night vision, especially coupled with it's external lens separated from the IR LED's.
CAM1723TW - TWIN CAMERA version - reversing camera + rear view camera for 2022+ Vauxhall Movano vans
Our most popular model. This camera is the ideal selection if you want both a reversing camera and a rear-view driving camera in one. A wide-angle camera covers the rear of the van for reversing purposes, while a second rear view/driving camera is located at the top of the camera, looking backwards down the road. This is designed to be on all the time while driving so that you can keep an eye on following traffic. This camera is designed to utilise the light strip from the vans original brake light. This is achieved by removing the two screws from the front of your existing brake light, removing the light strip by releasing the 3x top tabs and the 3x bottom tabs, then transplanting that in to the new brake light reversing camera lens body. Both cameras have adjustment to get the optimum angle of view.
